Article Dans Une Revue Energy Procedia Année : 2016

Influence of the discharge mode on the optical and passivation properties of SiNx:H deposited by PECVD at atmospheric pressure

Résumé

The cost of industrial silicon solar cells could be greatly reduced by the implementation of PECVD at atmospheric pressure for the deposition of the silicon nitride (SiN) antireflective coating. For a successful development of this vacuum-free process tool, a deep understanding of the plasma discharge mode has to be undertaken. This work focuses on the control of a wide range of plasma excitation conditions in order to obtain homogeneous dielectric barrier discharges (DBD) at atmospheric pressure, and thus dense and uniform SiN layers. The influence of the discharge mode is then studied in order to optimize the optical and passivation properties of the SiN thin films, showing good antireflective properties as well as surface recombination velocities as low as 15 cm.s-1.

Fichier principal
Vignette du fichier
1-s2.0-S1876610216305148-main.pdf (448.31 Ko) Télécharger le fichier
Origine Fichiers éditeurs autorisés sur une archive ouverte
Licence

Dates et versions

hal-01467741 , version 1 (25-10-2024)

Licence

Identifiants

Citer

Rémy Bazinette, Jean-François Lelièvre, Laura Gaudy, Françoise F. Massines. Influence of the discharge mode on the optical and passivation properties of SiNx:H deposited by PECVD at atmospheric pressure. Energy Procedia, 2016, 92, pp.309-316. ⟨10.1016/j.egypro.2016.07.087⟩. ⟨hal-01467741⟩
122 Consultations
69 Téléchargements

Altmetric

Partager

  • More